服务时间全天24小时
办理范围全国
业务周期7-10工作日
服务优势经验丰富
认证名称SAA认证
行业认证咨询
澳大利亚的标准机构为Standards Association of Australian,所以很多朋友把澳大利亚认证称为SAA认证。实际上SAA只是标准制定机构,而不颁发产品认证证书。SAA后来又改名为:Standards Australia Limited。SAA是立的公司,与**没有直接的关系,但是联邦**和州**是它其中的成员。SAA和澳大利亚联邦**签署了一个备忘录,承认SAA是澳大利亚的非**标准组织的高组织。备忘录也指出,标准的制定要与WTO的要求一致。因此,有协议指出当合适的已存在时,就不用制定新的澳大利亚标准。澳大利亚的标准以"AS"开头,澳大利亚与新西兰的联合标准以"AS/NZS"开头。澳大利亚的标准与新西兰的标准基本与IEC一致,同时存在一些差异。澳大利亚和新西兰推行标准的统一和认证的相互认可,产品只要取得一个的认证后就可在另外一个销售。
SAA是进入澳大利亚市场的电器产品须符合当地的安全法规,即业界经常面对的认证。由于澳大利亚和新西兰两国的互认协议,所有取得澳大利亚认证的产品,均可顺利地进入新西兰市场销售。所有电器产品均要做安全认证( SAA )。SAA 的标志主要有两种,一种是形式认可,一种是标准标志。形式认证是只能样品负责,而标准标志是需每个进行工厂审查的。目前国内申请 SAA 认证有两种方式,一种是通过 CB 测试报告转,若没有 CB 测试报告,则也可以直接申请。
用的灯具THERAPEUTIC LAMPAS/NZS 3350.1 and AS/NZS 3350.2.27:1996 with amendments 1 to 3 (until 31 May 2011) orAS/NZS 60335.1 and AS/NZS 60335.2.27:2004 with amendments 1 and 2.
51. 便携式工具TOOL - PORTABLE TYPEDrill-AS/NZS 60745.1 and AS/NZS 60745.2.1:2003Sander or polisher (other than disk types)-AS/NZS 60745.1 and AS/NZS 60745.2.4:2003.Circular saw-AS/NZS 60745.1 and AS/NZS 60745.2.5:2003 (until 25 May 2009) or AS/NZS 60745.1 andAS/NZS 60745.2.5:2007.Jig or sabre saw-AS/NZS 60745.1 and AS/NZS 60745.2.11:2003.Planer-AS/NZS 60745.1 and AS/NZS 60745.2.14:2003.Router-AS/NZS 60745.1 and AS/NZS 60745.2.17:2003.Grinder, polisher and disk type sander-AS/NZS 3100 and AS/NZS 3160 (until 20 October 2009) or AS/NZS 60745.1 and AS/NZS60745.2.3:2006.Chain saw-AS/NZS 3100 and AS/NZS 3160 (until 25 August 2009) or AS/NZS 60745.1 and AS/NZS60745.2 13:2006.Jointer-AS/NZS 3100 and AS/NZS 3160 (until 25 November 2008) or AS/NZS 60745.1 and AS/NZS60745.2 19:2005.Other-AS/NZS 3100 and AS/NZS 3160.
真空清洁器VACUUM CLEANERHand held garden type-AS/NZS 3350.1 and AS/NZS 3350.2.2:2001 with amendment 1 (until 14 November 2010) orAS/NZS 60335.1 and AS/NZS 60335.2.100:2003Other-AS/NZS 3350.1 and AS/NZS 3350.2.2:2001with amendment 1 (until 22 November 2009) orAS/NZS 60335.1 and AS/NZS 60335.2.2:2002 with amendments 1 and 2.
53. 墙壁开关WALL SWITCHAS/NZS 3100 and AS/NZS 3133:2008.
54. 洗衣机WASHING MACHINEAS/NZS 3350.1 and AS/NZS 3350.2.7:2001 with amendment 1 (until 22 November 2009) orAS/NZS 60335.1 and AS/NZS 60335.2.7:2002 with amendments 1 to 3.
55.水床加热器WATER BED HEATERAS/NZS 3350.1 and AS/NZS 3350.2.66:1997 with amendments 1 to 3 (until 3 September2011) or AS/NZS 60335.1 and AS/NZS 60335.2.66:2004.56. 热水炉WATER HEATERPressure storage - AS/NZS 3350.1 and AS/NZS 3350.2.21:1999 with amendments 1 to 5 (until 22 November2009) or AS/NZS 60335.1 and AS/NZS 60335.2.21:2002 with amendments 1 and 2.Instantaneous -AS/NZS 3350.1 and AS/NZS 3350.2.35:1999 with amendments 1 and 2 (until 15 October2011) or AS/NZS 60335.1 and AS/NZS 60335.2.35:2004 with amendment 1.
投影仪PROJECTORAS/NZS 3350.1 and AS/NZS 3350.2.56:1998 with amendments 1 to 3 (until 23 June 2013) orAS/NZS 60335.1 and AS/NZS 60335.2.56:2006.
38. 电磁炉RANGEAS/NZS 3350.1 and AS/NZS 3350.2.6:2006 with amendment 1 (until 22 November 2009) orAS/NZS 60335.1 and AS/NZS 60335.2.6:2008 with amendment 1.
39. 抽油烟机RANGE HOODAS/NZS 3350.1 and AS/NZS 3350.2.31:2001 with amendments 1 and 2 (until 3 September2011) or AS/NZS 60335.1 and 60335.2.31:2004 with amendments 1 and 2.
40. 电动剃须刀/电推剪RAZOR/HAIR CLIPPERAS/NZS 3350.1 and AS/NZS 3350.2.8:1995 with amendments 1 to 3 (until 31 May 2011) orAS/NZS 60335.1 and AS/NZS 60335.2.8:2004 with amendment 1.
41. 冰箱/冷柜REFRIGERATOR/FREEZERAS/NZS 3350.1 and AS/NZS 3350.2.24:2001 with amendment 1 (until 14 November 2010) orAS/NZS 60335.1 and AS/NZS 60335.2.24:2003 with amendments 1 to 3.
42. 漏电流装置RESIDUAL CURRENT DEVICEWithout integral overcurrent protection -AS/NZS 61008.1:2004 or AS3190:2002 with amendment 1.With integral overcurrent protection -AS/NZS 61009.1:2004 with amendment 1 or AS/NZS 3190:2002 with amendment 1 and AS3111
43. 房间取暖器ROOM HEATERThermal storage type-AS/NZS 3350.1 and AS/NZS 3350.2.61:2001 with amendment 1 (until 17 June 2012) orAS/NZS 60335.1 and AS/NZS 60335.2.61:2005 with amendment 1.Other-AS/NZS 3350.1 andAS/NZS 3350.2.30:2007 with amendment 1 (until 31 May 2011) or AS/NZS 60335.1 andAS/NZS 60335.2.30:2004 with amendments 1 to 5.
44. 缝纫机*ING MACHINEAS/NZS 3350.1 and AS/NZS 3350.2.28:1996 with amendments 1 to 3 (until 23 June 2013) orAS/NZS 60335.1 and AS/NZS 60335.2.28:2006.
插座SOCKET-OUTLETClass specification:AS/NZS 3100 and AS/NZS 3112
46. 电烙铁SOLDERING IRONAS/NZS 3350.1 and AS/NZS 3350.2.45:1997 with amendments 1 to 3 (until 3 September2011) or AS/NZS 60335.1 and AS/NZS 60335.2.45:2004.
47. 连接导线SUPPLY FLEXIBLE CORDAS 3191:2008; orAS/NZS 60227.5:2003 with amendment 1 (PVC); orAS/NZS 60245.4:2003 with amendment 1 (Rubber).
48. 游泳池设备或疗养设备SWIMMING POOL OR EQUIPMENTPump-AS/NZS 3350.1 and AS/NZS 3350.2.41:1997 with amendments 1 to 3 (until 3 September2011) or AS/NZS 60335.1 and AS/NZS 60335.2.41:2004.Other-AS/NZS 3100 and AS/NZS 3136:2001 with amendments 1 and 2.
49. 电视接收机TELEVISION RECEIVERAS/NZS 60065
周期
一般情况下,IT AV 灯具 小家电类常见产品申请澳大利亚SAA认证的周期是3-4周,如果产品质量不达标,可能日期会有所延长。
提交报告到澳州审核时需要提供产品插头的SAA证书(主要是针对带插头的产品),不然不给予办理,产品里面的重要的元器件SAA证,像灯具需要提供灯具里面变压器SAA证书,不然澳州审核资料不通过
流程
1、填写申请书
2、产品送样测试
3、产品整改(测试不合格的时候)
4、出具报告
5、报告评估
6、出具证书
http://janglcs.b2b168.com