服务时间全天24小时
办理范围全国
业务周期7-10工作日
服务优势经验丰富
认证名称SAA认证
行业认证咨询
澳大利亚的标准机构为Standards Association of Australian，所以很多朋友把澳大利亚认证称为SAA认证。实际上SAA只是标准制定机构，而不颁发产品认证证书。SAA后来又改名为:Standards Australia Limited。SAA是立的公司，与**没有直接的关系，但是联邦**和州**是它其中的成员。SAA和澳大利亚联邦**签署了一个备忘录，承认SAA是澳大利亚的非**标准组织的高组织。备忘录也指出，标准的制定要与WTO的要求一致。因此，有协议指出当合适的已存在时，就不用制定新的澳大利亚标准。澳大利亚的标准以"AS"开头，澳大利亚与新西兰的联合标准以"AS/NZS"开头。澳大利亚的标准与新西兰的标准基本与IEC一致，同时存在一些差异。澳大利亚和新西兰推行标准的统一和认证的相互认可，产品只要取得一个的认证后就可在另外一个销售。
SAA是进入澳大利亚市场的电器产品须符合当地的安全法规，即业界经常面对的认证。由于澳大利亚和新西兰两国的互认协议，所有取得澳大利亚认证的产品，均可顺利地进入新西兰市场销售。所有电器产品均要做安全认证( SAA )。SAA 的标志主要有两种，一种是形式认可，一种是标准标志。形式认证是只能样品负责，而标准标志是需每个进行工厂审查的。目前国内申请 SAA 认证有两种方式，一种是通过 CB 测试报告转，若没有 CB 测试报告，则也可以直接申请。
真空清洁器VACUUM CLEANERHand held garden type-AS/NZS 3350.1 and AS/NZS 3350.2.2:2001 with amendment 1 (until 14 November 2010) orAS/NZS 60335.1 and AS/NZS 60335.2.100:2003Other-AS/NZS 3350.1 and AS/NZS 3350.2.2:2001with amendment 1 (until 22 November 2009) orAS/NZS 60335.1 and AS/NZS 60335.2.2:2002 with amendments 1 and 2.
53. 墙壁开关WALL SWITCHAS/NZS 3100 and AS/NZS 3133:2008.
54. 洗衣机WASHING MACHINEAS/NZS 3350.1 and AS/NZS 3350.2.7:2001 with amendment 1 (until 22 November 2009) orAS/NZS 60335.1 and AS/NZS 60335.2.7:2002 with amendments 1 to 3.
55.水床加热器WATER BED HEATERAS/NZS 3350.1 and AS/NZS 3350.2.66:1997 with amendments 1 to 3 (until 3 September2011) or AS/NZS 60335.1 and AS/NZS 60335.2.66:2004.56. 热水炉WATER HEATERPressure storage - AS/NZS 3350.1 and AS/NZS 3350.2.21:1999 with amendments 1 to 5 (until 22 November2009) or AS/NZS 60335.1 and AS/NZS 60335.2.21:2002 with amendments 1 and 2.Instantaneous -AS/NZS 3350.1 and AS/NZS 3350.2.35:1999 with amendments 1 and 2 (until 15 October2011) or AS/NZS 60335.1 and AS/NZS 60335.2.35:2004 with amendment 1.
干衣机CLOTHES DRTERRotary type:AS/NZS 3350.1 and AS/NZS 3350.2.11:2001 with amendment 1 (until 22 November 2009) orAS/NZS 60335.1 and AS/NZS 60335.2.11:2002 with amendments 1 and 2.Cabinet type:AS/NZS 3350.1 and AS/NZS 3350.2.43:2001 with amendments 1 and 2 (until 17 June 2012)or AS/NZS 60335.1 and AS/NZS 60335.2.43:2005 with amendment 1.
8. 控制或调节装置CONTROL OR CONITIONING DEVICEAS/NZS 3100 and AS/NZS 3197:2005 with amendment 1.
9. 移动式烹调器具COOKING APPLIANCE-PORTABLE TYPEGriller, roaster, or oven (including breadmaker)-AS/NZS 3350.1 and AS/NZS 3350.2.9:1999 with amendments 1 to 4 (until 22 November2009) orAS/NZS 60335.1 and AS/NZS 60335.2.9:2002 with amendments 1 to 4.Warming plate and similar-AS/NZS 3350.1 and AS/NZS 3350.2.12:1997 with amendments 1 to 3 (until 31 May 2011); orAS/NZS 60335.1 and AS/NZS 60335.2.12:2004.Frying pan, deep fryer or wok-AS/NZS 3350.1 and AS/NZS 3350.2.13:2001 with amendment 1 (until 31 May 2011) orAS/NZS 60335.1 and AS/NZS 60335.2.13:2004 with amendments 1 and 2.Outdoor barbecue-AS/NZS 3350.1 and AS/NZS 3350.2.78:1996 with amendments 1 to 3 (until 17 June 2012) orAS/NZS 60335.1 and AS/NZS 60335.2.78:2005 with amendment 1.
10. 拖线板CORD EXTENSION SOCKETAS/NZS 3100 and AS/NZS 3120:1999.
11. 线上开关CORD-LINE SWITCHAS/NZS 3100 and AS/NZS 3127:2005.
12. 灯饰DECORATIVE LIGHTING OUTFITAS/NZS 60598.1 and AS/NZS 60598.2.20:2002.
13. 洗碗机DISHWASHING MACHINEAS/NZS 3350.1 and AS/NZS 3350.2.5:1995 with amendments 1 to 3 (until 22 November2009) or AS/NZS 60335.1 and AS/NZS 60335.2.5:2002 with amendment 1.
14. 螺口灯座EDISON SCREW LAMPHOLDERAS/NZS 3100 and AS/NZS 3140:2007 (until 30 December 2016) or AS/NZS 60238:2007.
15. 风扇FANAS/NZS 3350.1 and AS/NZS 3350.2.80:1998 with amendments 1 to 4 (until 3 September2011) or AS/NZS 60335.1 and AS/NZS 60335.2.80:2004.
移动式灯具LUMINAIRE - PORTABLE TYPEChild appealing type (refer to clause (f))-AS/NZS 60598.1 and AS/NZS 60598.2.10:1998.Type fitted with a built-in transformer or convertor-AS/NZS 60598.1 and AS/NZS 60598.2.6:1998.Floodlight-AS/NZS 60598.1 and AS/NZS 60598.2.5:2002.Other-AS/NZS 60598.1 and AS/NZS 60598.2.4: 2005 with amendment 1.
31. 器MASSAGE APPLIANCEAS/NZS 3350.1 and AS/NZS 3350.2.32:2001 with amendment 1 (until 3 September 2011) orAS/NZS 60335.1 and AS/NZS 60335.2.32:2004 with amendment 1.
32. 微波炉MICROWAVE OVENAS/NZS 3350.1 and AS/NZS 3350.2.25:2001 with amendment 1 (until 13 May 2009) orAS/NZS 60335.1 and AS/NZS 60335.2.25:2002 with amendments 1 to 4.
33. 微型过电流断路器MINIATURE OVERCURRENT CIRCUIT-BREAKERAS 3111or AS/NZS 60898.1:2004 and 60898.2:2004.
34.OUTLETDEVICEOUTLET DEVICEIntegral pin type (including travel adaptor) -AS/NZS 3100 and AS/NZS 3122:2005.Other -AS/NZS 3100 and AS/NZS 3105:2007.
35. 电源插座PLUGAS/NZS 3100 and AS/NZS 3112
36. 电源或充电器POWER SUPPLY OR CHARGERPower supply for general use-AS/NZS 61558.1 and AS/NZS 61558.2.6:2001 with amendment 1.Power supply (electronic or transformer types) designated for use with specificelectronic equipment-AS/NZS 60065 or AS/NZS 60950.1:2003 with amendments 1 to 3.Power supply for toys-AS/NZS 61558.1 and AS/NZS 61558.2.7:2001 (until 31 October 2010) or AS/NZS61558.1:2008 and 61558.2.7:2008.Power supply for bells or chimes-AS/NZS 61558.1 and AS/NZS 61558.2.8:2001.Power supply (electronic type) for lighting purposes-LED modules:AS/NZS 61347.1 and IEC 61347.2.13 edition 1.0Other:AS/NZS 61347.1 and AS/NZS 61347.2.2:2007.Power supply for Handlamps-AS/NZS 61558.1 and AS/NZS 61558.2.9:2003.Battery charger-AS/NZS 3350.1 and AS/NZS 3350.2.29:2001with amendment 1 (until 31 May 2011) orAS/NZS 60335.1 and AS/NZS 60335.2.29:2004 with amendment 1.
用的灯具THERAPEUTIC LAMPAS/NZS 3350.1 and AS/NZS 3350.2.27:1996 with amendments 1 to 3 (until 31 May 2011) orAS/NZS 60335.1 and AS/NZS 60335.2.27:2004 with amendments 1 and 2.
51. 便携式工具TOOL - PORTABLE TYPEDrill-AS/NZS 60745.1 and AS/NZS 60745.2.1:2003Sander or polisher (other than disk types)-AS/NZS 60745.1 and AS/NZS 60745.2.4:2003.Circular saw-AS/NZS 60745.1 and AS/NZS 60745.2.5:2003 (until 25 May 2009) or AS/NZS 60745.1 andAS/NZS 60745.2.5:2007.Jig or sabre saw-AS/NZS 60745.1 and AS/NZS 60745.2.11:2003.Planer-AS/NZS 60745.1 and AS/NZS 60745.2.14:2003.Router-AS/NZS 60745.1 and AS/NZS 60745.2.17:2003.Grinder, polisher and disk type sander-AS/NZS 3100 and AS/NZS 3160 (until 20 October 2009) or AS/NZS 60745.1 and AS/NZS60745.2.3:2006.Chain saw-AS/NZS 3100 and AS/NZS 3160 (until 25 August 2009) or AS/NZS 60745.1 and AS/NZS60745.2 13:2006.Jointer-AS/NZS 3100 and AS/NZS 3160 (until 25 November 2008) or AS/NZS 60745.1 and AS/NZS60745.2 19:2005.Other-AS/NZS 3100 and AS/NZS 3160.
周期
一般情况下，IT AV 灯具 小家电类常见产品申请澳大利亚SAA认证的周期是3-4周，如果产品质量不达标，可能日期会有所延长。
提交报告到澳州审核时需要提供产品插头的SAA证书(主要是针对带插头的产品),不然不给予办理,产品里面的重要的元器件SAA证，像灯具需要提供灯具里面变压器SAA证书，不然澳州审核资料不通过
流程
1、填写申请书
2、产品送样测试
3、产品整改(测试不合格的时候)
4、出具报告
5、报告评估
6、出具证书
http://janglcs.b2b168.com
